Shop: Masori.de

Audiocontrol D-6.1200

The D-6.1200 from Audiocontrol is a powerful 6-channel DSP amplifier that offers an unparalleled combination of technology and flexibility. This device is more than just an ordinary amplifier. It is a carefully designed single-unit solution that provides exceptional performance and tuning flexibility for both factory and aftermarket sound systems. Features such as active speaker inputs, line-level inputs and outputs, as well as AccuBASS®, GTOTM Signal Sense, and MILCTM functions make the D-6.1200 a future-proof product that is compatible with both current and future car audio solutions. features Built-in DSP Configurable as a 6/5/4/3-channel amplifier 6 x 200 Watts at 2 Ohms 6 x 125 Watts at 4 Ohms 400 Watts at 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal Sampling Active speaker level inputs (8 channels) for OEM integration 6 preamplifier inputs 2 assignable preamplifier outputs Solid one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-Band Equalizer Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth streamer/programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 6 RMS 2 Ω - 200 W x 6 RMS Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 24 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm KLIRRFAKTOR+N: < 0.1% Power/Earth cable thickness: 25mm² Protection value: 3 x 40 A WEIGHT AND DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.2 kg  DM SMART DSP Input Tab Output Tab DASHBOARD Connect your laptop to the D-6.1200 via the DM Smart DSP App from AudioControl, a fully equipped matrix DSP interface that gives you immediate and clear control over every aspect of your processor. "Route every input to every output, set Gain, Delay, and Polarity, and tune the D-6.1200 precisely with a 30-band EQ. High, Low, and Bandpass can be set for each output with 12 or 24 dB/octave Linkwitz-Riley filters." "For OEM integration, you can use the input and output RTAs that are available for each input and output to easily identify and sum the signals of the factory speakers." "With a clear user interface and an intuitive workflow, the AudioControl DM Smart DSP App makes guessing when tuning your system to your exact specifications unnecessary."

Show more

1366,04 €*

Shipping: 0,00 €

Continue to product

Secure redirect to the provider

Shop: Masori.de

Audiocontrol D-5.1300

Discover the D-5.1300, a 5-channel DSP amplifier from the renowned manufacturer Audiocontrol. The D-5.1300 offers various features, including eight active speaker inputs, six line-level inputs, independent crossovers, and a 30-band EQ with Auto-EQ. Additionally, it includes functions such as signal summation, signal delay, built-in RTAs, and AccuBASS®. This puts control over your audio environment literally in your hands. The amplifier can be seamlessly integrated into OEM or aftermarket sound systems, providing an exceptional listening experience. Ideal for anyone who wants to enjoy the best possible audio performance. Features Built-in DSP Configurable as a 5- or 3-channel amplifier 4 x 200 Watt + 1 x 500 Watt @ 2 Ohm 4 x 100 Watts + 1 x 300 Watts at 4 Ohms 400 Watts @ 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal sampling Independent Linkwitz-Riley Alignment Crossovers Summarizable active speaker-level inputs (8 channels) for OEM integration 6 preamplifier inputs PFM subsonic filter Solid, one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer with auto-EQ Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth Streamer/Programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 500 mV - 6 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 100 W x 4 + 300 W x 1 2 Ω - 200 W x 4 + 500 W x 1 Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 22 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Current/Ground wire thickness: 25mm² Protection value: 4 x 30 A WEIGHT & DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.3 kg  DM SMART DSP Input Tab Output Tab Dashboard The cross-platform DM Smart DSP app from AudioControl allows complete control over all tuning functions of the D-5.1300, including 30 EQ bands, signal delay, phase correction, AccuBASS®, GTO™ Signal Sense, MILC™ Clip Detection, as well as integrated input and output RTAs. With the optional AC-BT24 Bluetooth® streamer & programmer, you can access the DM Smart DSP from your smartphone or tablet and easily make level adjustments and retrieve presets with the new DM Control app.

Show more

1434,46 €*

Shipping: 0,00 €

Continue to product

Secure redirect to the provider

Similar search terms for Audiocontrol-D-4-800

Keine ähnlichen Begriffe gefunden.

Top-Angebote

Products related to Audiocontrol-D-4-800:

Shop: Masori.de
Audiocontrol D-4.800
The D-4.800, presented by Audiocontrol, is a 4-channel DSP amplifier that is as powerful as it is flexible. This remarkable device offers a combination of excellent amplifier technology and powerful matrix DSP. Whether you want to perfect your factory or retrofitted sound system down to the last detail, the D-4.800 offers numerous options for sound optimization with its innovative technology. You benefit from features such as active speaker inputs, line-level inputs and outputs and complete control over all functions, including 30 equalizer bands, signal delay and other special AudioControl functions. Thanks to its compact design in a solid cast aluminum housing, it is the perfect solution for OEM integrations and retrofits. characteristics Built-in DSP Configurable as 4/3/2-channel amplifier 4 x 200 watts at 2 ohms 4 x 125 watts at 4 ohms 400 watts at 4 ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamplifier inputs 2 assignable preamp outputs Solid, one-piece aluminum housing Input and output RTA for precise and well-founded tuning input and output delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer Optional AC-BT24 Bluetooth Streamer/Programmer The DM Smart DSP app is available for download for Mac/PC DM SMART DSP input tab output tab Dashboard Connect your laptop to the D-4.800 via AudioControl's DM Smart DSP app, a full-featured matrix DSP interface that gives you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity, and finely tune the D-4.800 with a 30-band EQ. High, low and bandpass can be adjusted for each output with 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, you can utilize the input and output RTAs available for each input and output to easily identify and sum the factory speaker signals. With a clean user interface and intuitive workflow, AudioControl's DM Smart DSP app takes the guesswork out of tuning your system to your exact specifications. SPECIFICATIONS ENTRY Preamplifier inputs: 4 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 6 Input voltage range for speaker level: 3 V - 40 Vrms OUTPUTS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 4 RMS 2 Ω - 200 W x 4 RMS Bridged 4 Ω - 400 W RMS Preamplifier outputs: 2 Maximum preamplifier output: 8.5 V RMS PERFORMANCE Frequency response: 20 Hz - 24 kHz Signal-to-noise ratio: 102 dBA, Ref 200 W @ 2 ohms THD+N: < 0.1% Power/ground wire size: 25mm² Fuse rating: 2 x 40 A WEIGHT & DIMENSIONS Dimensions:  22.8  x 20 x 5.3cm Weight: 2.3 kg
Show more
1050,98 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol PNW 4
The PNW 4 from Audiocontrol is a 4" (10cm) coaxial speaker that impresses with numerous innovative features. The robust construction with a edge-reinforced steel frame provides additional structural strength. The black anodized voice coil former ensures excellent heat dissipation, and the stiff, polyglimmer-coated cone allows for optimized sound reproduction. A rear-damped hybrid silk dome tweeter ensures an extended frequency response. With its linear double roll surround for precise cone movement and the point source design, the speaker offers a seamless transition from midrange to tweeter. Features 4" (10cm) Coax Reinforced steel frame for additional structural strength Black anodized coil carrier for excellent heat dissipation Linear double roll groove for precise cone movement Complex, FEA-calculated motor with high efficiency Stiffer, polyglimmer-coated cone for optimized sound reproduction Rear-damped hybrid silk dome tweeter for extended frequency response Concentric point sound source design for a seamless transition from midrange to tweeter Sound diffuser and radiation collar for better off-axis frequency response High-quality mounting material included in the delivery scope Technical Data Butterworth crossover DC resistance (Re). 2.6 Ohm Filter Type HP System frequency (Fs) frequency response 75-20k Hz XO frequency 5900 Hz Slope (Octave) -6 dB Diameter of the oscillating coil of the midrange driver. 25 mm Dimensions Overall diameter (without grid): 133 mm  Cut-out diameter: 91.5 mm  Installation depth: 42.2 mm Height (without grid): 4.1 mm Height (with grid): 16.5 mm  Motor diameter (with cover): 75.4 mm Overall diameter of the grid: 137 mm
Show more
220,45 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol Epicenter
Discover the Epicenter from Audiocontrol - a high-low adapter that redefines the world of sound. This patented bass restoration processor elevates your bass performance to a new level and makes your subwoofers hit deeper and harder. Functionality meets innovative details: a maximizer for bass optimization, a backlit display for bass restoration, and a controller for easy dashboard mounting are just a few of the highlights. Look forward to precise bass control, an effective PFM subsonic filter, and balanced inputs that ensure you an amazing listening experience. Want to draw attention with the bass? With the Epicenter from Audiocontrol, you have the perfect equipment for that. features Patented Bass Maximizer™ Rules for Dashboard Assembly Illuminated display for bass restoration Parametric Bass Control PFM Subsonic Filter Symmetrical Inputs Bass output control ENTRANCES Preamplifier inputs: 1 (2 channels) Maximum input level: 15Vrms Input impedance: 10kΩ EXITS Preamp outputs: 1 (2 channels) Maximum output level: 13.5 Vrms Output impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.003% Frequency response: 10Hz-100kHz Dynamic range: 110dB CONTROL remote control input GENERAL Power Supply: High Headroom PWM Switching Current consumption: 150mA Recommended security value: 1A WEIGHT & DIMENSIONS Dimensions: 20 x 14 x 3cm Weight: 0.8 kg
Show more
180,19 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol LC8i
Discover the Audiocontrol LC8i, an 8-channel high-low adapter designed for optimal flexibility and excellent sound quality. With its active input circuitry, it can process speaker level signals of up to 400 watts per channel and convert them into high-quality preamp signals that can be sent to aftermarket processors or amplifiers. Additionally, the LC8i offers the advantage of an Aux input, allowing the connection of secondary sources such as iPods and satellite radio tuners. With the easy switching option between main inputs and the Aux input, you experience maximum control and flexibility for your sound. features Eight input and output channels - for 400-watt signals per channel Auxiliary input for easy connection of iPods or other portable audio devices Multifunction control panel (included in delivery) for source selection, auxiliary input volume, and subwoofer level control. Internal channel summation Selectable GTO™ Signal Recognition Enable Circuit SPECIFICATIONS ENTRANCES Speaker level inputs: 4 (8 channels) Maximum input (speaker level): 400W per channel at 4Ω Preamp inputs (Aux): 1 (2 channels) Input impedance: 20kΩ EXITS Preamp outputs: 4 (8 channels) Maximum output level: 8.5Vrms Output gain: ±12dB Output impedance: 150Ω performance capability Total Harmonic Distortion: 0.01% Frequency response: 10Hz-22kHz CONTROL remote control input 12VDC Remote Out (always active when the device is turned on) GENERAL Power Supply: High Headroom PWM Circuit Current consumption: 350mA Recommended protection: 2A WEIGHT AND DIMENSIONS Dimensions: 21.8 x 12 x 3.1cm Weight: 1.4kg
Show more
371,45 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de

Audiocontrol LC6i

The LC6i from Audiocontrol is a high-low adapter of the highest class. Based on the proven technology of its predecessor, the LC6, this 6-channel adapter offers impressive internal summation and converts factory radio signals into high-quality preamplifier signals. With its advanced GTO™ signal detection, the ability to connect aftermarket processors and amplifiers, and the retention of factory volume and steering wheel controls, the LC6i makes no compromises. It transforms both crossover and full-range signals, creating a top-notch sound experience. Additional individual sound control allows for customized audio playback for true sound enthusiasts. Features 12-Volt-High-Current-Trigger-Output Internal Channel Summation GTO™-Signal Recognition Inputs Speaker level inputs - can accept 400-watt signals! Rules for Level Adjustment Six input and output channels AutoMode™ converts a 4-channel input into a 6-channel output. Input for optional subwoofer level control SPECIFICATIONS ENTRANCES Speaker level input: 3 (6 channels) Maximum speaker level input: 400W per channel at 4Ω Input impedance: 20kΩ EXITS Preamp outputs: 3 (6 channels) Maximum output level: 9.5Vrms Output gain: ±12dB performance capability Total Harmonic Distortion: 0.01% Frequency response: 10 Hz to 22 kHz CONTROL remote control input 12VDC Remote Out (always active when the device is turned on) GENERAL Power Supply: High Headroom PWM Circuit Current consumption: 200mA Recommended coverage: 1A WEIGHTS AND DIMENSIONS Dimensions: 20 x 15 x 2.8cm Weight: 0.9 kg

Show more

195,92 €*

Shipping: 0,00 €

Continue to product

Secure redirect to the provider

Shop: Masori.de

Audiocontrol EPICX12

The EPICX12 from Audiocontrol is a powerful 12" Subwoofer that impresses with an RMS power of 500 watts and a maximum power of 750 watts. With its Dual Voice Coil technology, it offers you flexibility when connecting to various amplifier configurations. The low resonance frequency of 30.1 Hz allows for a punchy deep bass, while the high-precision motor ensures clean and controlled bass reproduction. The Subwoofer is perfectly tuned for AudioControl's bass restoration technology, providing an ultimate low-end experience. With an outer diameter of 316 mm, it is easy to install and integrates seamlessly into your audio system. Power & Performance: Size: 12 inches (300 mm) RMS Power: 500 watts Maximum Power: 750 watts Impedance: Either 2 or 4 Ohm (Dual Voice Coil) Voice Coil: 2.38 inches (approx. 60 mm) Resonance Frequency (fs): 30.1 Hz Efficiency: 86.6 dB Highlights & Technology: Powerful Deep Bass: Particularly strong in the lowest frequency ranges due to the low resonance frequency of 30.1 Hz. High-Precision Motor: Ensures efficient power transfer and clean, controlled bass reproduction. Dual Voice Coil: Allows maximum flexibility when connecting to various amplifier configurations. Ready for The EPICENTER: Perfectly tuned to AudioControl's bass restoration technology for an ultimate low-end experience. Installation & Dimensions: Outer Diameter: 316 mm (12.4") Cutout Diameter: 281 mm (11.06") Mounting Depth: 153.8 mm (6") Installation Height: 24 mm (1") Magnet Dimensions: 156 x 75 x 25 mm Motor Diameter (with cover): 162 mm (6.4")

Show more

200,32 €*

Shipping: 0,00 €

Continue to product

Secure redirect to the provider

Top-Angebote

Products related to Audiocontrol-D-4-800:

Shop: Masori.de
Audiocontrol D-6.1200
The D-6.1200 from Audiocontrol is a powerful 6-channel DSP amplifier that offers an unparalleled combination of technology and flexibility. This device is more than just an ordinary amplifier. It is a carefully designed single-unit solution that provides exceptional performance and tuning flexibility for both factory and aftermarket sound systems. Features such as active speaker inputs, line-level inputs and outputs, as well as AccuBASS®, GTOTM Signal Sense, and MILCTM functions make the D-6.1200 a future-proof product that is compatible with both current and future car audio solutions. features Built-in DSP Configurable as a 6/5/4/3-channel amplifier 6 x 200 Watts at 2 Ohms 6 x 125 Watts at 4 Ohms 400 Watts at 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal Sampling Active speaker level inputs (8 channels) for OEM integration 6 preamplifier inputs 2 assignable preamplifier outputs Solid one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-Band Equalizer Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth streamer/programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 6 RMS 2 Ω - 200 W x 6 RMS Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 24 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm KLIRRFAKTOR+N: < 0.1% Power/Earth cable thickness: 25mm² Protection value: 3 x 40 A WEIGHT AND DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.2 kg  DM SMART DSP Input Tab Output Tab DASHBOARD Connect your laptop to the D-6.1200 via the DM Smart DSP App from AudioControl, a fully equipped matrix DSP interface that gives you immediate and clear control over every aspect of your processor. "Route every input to every output, set Gain, Delay, and Polarity, and tune the D-6.1200 precisely with a 30-band EQ. High, Low, and Bandpass can be set for each output with 12 or 24 dB/octave Linkwitz-Riley filters." "For OEM integration, you can use the input and output RTAs that are available for each input and output to easily identify and sum the signals of the factory speakers." "With a clear user interface and an intuitive workflow, the AudioControl DM Smart DSP App makes guessing when tuning your system to your exact specifications unnecessary."
Show more
1366,04 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol D-5.1300
Discover the D-5.1300, a 5-channel DSP amplifier from the renowned manufacturer Audiocontrol. The D-5.1300 offers various features, including eight active speaker inputs, six line-level inputs, independent crossovers, and a 30-band EQ with Auto-EQ. Additionally, it includes functions such as signal summation, signal delay, built-in RTAs, and AccuBASS®. This puts control over your audio environment literally in your hands. The amplifier can be seamlessly integrated into OEM or aftermarket sound systems, providing an exceptional listening experience. Ideal for anyone who wants to enjoy the best possible audio performance. Features Built-in DSP Configurable as a 5- or 3-channel amplifier 4 x 200 Watt + 1 x 500 Watt @ 2 Ohm 4 x 100 Watts + 1 x 300 Watts at 4 Ohms 400 Watts @ 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal sampling Independent Linkwitz-Riley Alignment Crossovers Summarizable active speaker-level inputs (8 channels) for OEM integration 6 preamplifier inputs PFM subsonic filter Solid, one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer with auto-EQ Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth Streamer/Programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 500 mV - 6 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 100 W x 4 + 300 W x 1 2 Ω - 200 W x 4 + 500 W x 1 Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 22 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Current/Ground wire thickness: 25mm² Protection value: 4 x 30 A WEIGHT & DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.3 kg  DM SMART DSP Input Tab Output Tab Dashboard The cross-platform DM Smart DSP app from AudioControl allows complete control over all tuning functions of the D-5.1300, including 30 EQ bands, signal delay, phase correction, AccuBASS®, GTO™ Signal Sense, MILC™ Clip Detection, as well as integrated input and output RTAs. With the optional AC-BT24 Bluetooth® streamer & programmer, you can access the DM Smart DSP from your smartphone or tablet and easily make level adjustments and retrieve presets with the new DM Control app.
Show more
1434,46 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol D-4.800
The D-4.800, presented by Audiocontrol, is a 4-channel DSP amplifier that is as powerful as it is flexible. This remarkable device offers a combination of excellent amplifier technology and powerful matrix DSP. Whether you want to perfect your factory or retrofitted sound system down to the last detail, the D-4.800 offers numerous options for sound optimization with its innovative technology. You benefit from features such as active speaker inputs, line-level inputs and outputs and complete control over all functions, including 30 equalizer bands, signal delay and other special AudioControl functions. Thanks to its compact design in a solid cast aluminum housing, it is the perfect solution for OEM integrations and retrofits. characteristics Built-in DSP Configurable as 4/3/2-channel amplifier 4 x 200 watts at 2 ohms 4 x 125 watts at 4 ohms 400 watts at 4 ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamplifier inputs 2 assignable preamp outputs Solid, one-piece aluminum housing Input and output RTA for precise and well-founded tuning input and output delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer Optional AC-BT24 Bluetooth Streamer/Programmer The DM Smart DSP app is available for download for Mac/PC DM SMART DSP input tab output tab Dashboard Connect your laptop to the D-4.800 via AudioControl's DM Smart DSP app, a full-featured matrix DSP interface that gives you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity, and finely tune the D-4.800 with a 30-band EQ. High, low and bandpass can be adjusted for each output with 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, you can utilize the input and output RTAs available for each input and output to easily identify and sum the factory speaker signals. With a clean user interface and intuitive workflow, AudioControl's DM Smart DSP app takes the guesswork out of tuning your system to your exact specifications. SPECIFICATIONS ENTRY Preamplifier inputs: 4 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 6 Input voltage range for speaker level: 3 V - 40 Vrms OUTPUTS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 4 RMS 2 Ω - 200 W x 4 RMS Bridged 4 Ω - 400 W RMS Preamplifier outputs: 2 Maximum preamplifier output: 8.5 V RMS PERFORMANCE Frequency response: 20 Hz - 24 kHz Signal-to-noise ratio: 102 dBA, Ref 200 W @ 2 ohms THD+N: < 0.1% Power/ground wire size: 25mm² Fuse rating: 2 x 40 A WEIGHT & DIMENSIONS Dimensions:  22.8  x 20 x 5.3cm Weight: 2.3 kg
Show more
1050,98 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol PNW 4
The PNW 4 from Audiocontrol is a 4" (10cm) coaxial speaker that impresses with numerous innovative features. The robust construction with a edge-reinforced steel frame provides additional structural strength. The black anodized voice coil former ensures excellent heat dissipation, and the stiff, polyglimmer-coated cone allows for optimized sound reproduction. A rear-damped hybrid silk dome tweeter ensures an extended frequency response. With its linear double roll surround for precise cone movement and the point source design, the speaker offers a seamless transition from midrange to tweeter. Features 4" (10cm) Coax Reinforced steel frame for additional structural strength Black anodized coil carrier for excellent heat dissipation Linear double roll groove for precise cone movement Complex, FEA-calculated motor with high efficiency Stiffer, polyglimmer-coated cone for optimized sound reproduction Rear-damped hybrid silk dome tweeter for extended frequency response Concentric point sound source design for a seamless transition from midrange to tweeter Sound diffuser and radiation collar for better off-axis frequency response High-quality mounting material included in the delivery scope Technical Data Butterworth crossover DC resistance (Re). 2.6 Ohm Filter Type HP System frequency (Fs) frequency response 75-20k Hz XO frequency 5900 Hz Slope (Octave) -6 dB Diameter of the oscillating coil of the midrange driver. 25 mm Dimensions Overall diameter (without grid): 133 mm  Cut-out diameter: 91.5 mm  Installation depth: 42.2 mm Height (without grid): 4.1 mm Height (with grid): 16.5 mm  Motor diameter (with cover): 75.4 mm Overall diameter of the grid: 137 mm
Show more
220,45 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Similar search terms for Audiocontrol-D-4-800

Keine ähnlichen Begriffe gefunden.

Shop: Masori.de
Audiocontrol Epicenter
Discover the Epicenter from Audiocontrol - a high-low adapter that redefines the world of sound. This patented bass restoration processor elevates your bass performance to a new level and makes your subwoofers hit deeper and harder. Functionality meets innovative details: a maximizer for bass optimization, a backlit display for bass restoration, and a controller for easy dashboard mounting are just a few of the highlights. Look forward to precise bass control, an effective PFM subsonic filter, and balanced inputs that ensure you an amazing listening experience. Want to draw attention with the bass? With the Epicenter from Audiocontrol, you have the perfect equipment for that. features Patented Bass Maximizer™ Rules for Dashboard Assembly Illuminated display for bass restoration Parametric Bass Control PFM Subsonic Filter Symmetrical Inputs Bass output control ENTRANCES Preamplifier inputs: 1 (2 channels) Maximum input level: 15Vrms Input impedance: 10kΩ EXITS Preamp outputs: 1 (2 channels) Maximum output level: 13.5 Vrms Output impedance: 150Ω PERFORMANCE Total Harmonic Distortion: 0.003% Frequency response: 10Hz-100kHz Dynamic range: 110dB CONTROL remote control input GENERAL Power Supply: High Headroom PWM Switching Current consumption: 150mA Recommended security value: 1A WEIGHT & DIMENSIONS Dimensions: 20 x 14 x 3cm Weight: 0.8 kg
Show more
180,19 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol LC8i
Discover the Audiocontrol LC8i, an 8-channel high-low adapter designed for optimal flexibility and excellent sound quality. With its active input circuitry, it can process speaker level signals of up to 400 watts per channel and convert them into high-quality preamp signals that can be sent to aftermarket processors or amplifiers. Additionally, the LC8i offers the advantage of an Aux input, allowing the connection of secondary sources such as iPods and satellite radio tuners. With the easy switching option between main inputs and the Aux input, you experience maximum control and flexibility for your sound. features Eight input and output channels - for 400-watt signals per channel Auxiliary input for easy connection of iPods or other portable audio devices Multifunction control panel (included in delivery) for source selection, auxiliary input volume, and subwoofer level control. Internal channel summation Selectable GTO™ Signal Recognition Enable Circuit SPECIFICATIONS ENTRANCES Speaker level inputs: 4 (8 channels) Maximum input (speaker level): 400W per channel at 4Ω Preamp inputs (Aux): 1 (2 channels) Input impedance: 20kΩ EXITS Preamp outputs: 4 (8 channels) Maximum output level: 8.5Vrms Output gain: ±12dB Output impedance: 150Ω performance capability Total Harmonic Distortion: 0.01% Frequency response: 10Hz-22kHz CONTROL remote control input 12VDC Remote Out (always active when the device is turned on) GENERAL Power Supply: High Headroom PWM Circuit Current consumption: 350mA Recommended protection: 2A WEIGHT AND DIMENSIONS Dimensions: 21.8 x 12 x 3.1cm Weight: 1.4kg
Show more
371,45 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol LC6i
The LC6i from Audiocontrol is a high-low adapter of the highest class. Based on the proven technology of its predecessor, the LC6, this 6-channel adapter offers impressive internal summation and converts factory radio signals into high-quality preamplifier signals. With its advanced GTO™ signal detection, the ability to connect aftermarket processors and amplifiers, and the retention of factory volume and steering wheel controls, the LC6i makes no compromises. It transforms both crossover and full-range signals, creating a top-notch sound experience. Additional individual sound control allows for customized audio playback for true sound enthusiasts. Features 12-Volt-High-Current-Trigger-Output Internal Channel Summation GTO™-Signal Recognition Inputs Speaker level inputs - can accept 400-watt signals! Rules for Level Adjustment Six input and output channels AutoMode™ converts a 4-channel input into a 6-channel output. Input for optional subwoofer level control SPECIFICATIONS ENTRANCES Speaker level input: 3 (6 channels) Maximum speaker level input: 400W per channel at 4Ω Input impedance: 20kΩ EXITS Preamp outputs: 3 (6 channels) Maximum output level: 9.5Vrms Output gain: ±12dB performance capability Total Harmonic Distortion: 0.01% Frequency response: 10 Hz to 22 kHz CONTROL remote control input 12VDC Remote Out (always active when the device is turned on) GENERAL Power Supply: High Headroom PWM Circuit Current consumption: 200mA Recommended coverage: 1A WEIGHTS AND DIMENSIONS Dimensions: 20 x 15 x 2.8cm Weight: 0.9 kg
Show more
195,92 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

Shop: Masori.de
Audiocontrol EPICX12
The EPICX12 from Audiocontrol is a powerful 12" Subwoofer that impresses with an RMS power of 500 watts and a maximum power of 750 watts. With its Dual Voice Coil technology, it offers you flexibility when connecting to various amplifier configurations. The low resonance frequency of 30.1 Hz allows for a punchy deep bass, while the high-precision motor ensures clean and controlled bass reproduction. The Subwoofer is perfectly tuned for AudioControl's bass restoration technology, providing an ultimate low-end experience. With an outer diameter of 316 mm, it is easy to install and integrates seamlessly into your audio system. Power & Performance: Size: 12 inches (300 mm) RMS Power: 500 watts Maximum Power: 750 watts Impedance: Either 2 or 4 Ohm (Dual Voice Coil) Voice Coil: 2.38 inches (approx. 60 mm) Resonance Frequency (fs): 30.1 Hz Efficiency: 86.6 dB Highlights & Technology: Powerful Deep Bass: Particularly strong in the lowest frequency ranges due to the low resonance frequency of 30.1 Hz. High-Precision Motor: Ensures efficient power transfer and clean, controlled bass reproduction. Dual Voice Coil: Allows maximum flexibility when connecting to various amplifier configurations. Ready for The EPICENTER: Perfectly tuned to AudioControl's bass restoration technology for an ultimate low-end experience. Installation & Dimensions: Outer Diameter: 316 mm (12.4") Cutout Diameter: 281 mm (11.06") Mounting Depth: 153.8 mm (6") Installation Height: 24 mm (1") Magnet Dimensions: 156 x 75 x 25 mm Motor Diameter (with cover): 162 mm (6.4")
Show more
200,32 €*
Shipping: 0,00 €
Continue to product
Secure redirect to the provider

* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.