Buy docking.be ?
We are moving the project
docking.be .
Are you interested in purchasing the domain
docking.be ?
domain@kv-gmbh.de · 0541-91531010
Buy docking.be ?
Who is familiar with the SPL programming language?
Software developers and engineers who work with audio processing and analysis are typically familiar with the SPL programming language. Additionally, individuals who specialize in digital signal processing and audio programming may also have experience with SPL. Overall, SPL is a niche language used in specific technical fields, so those who work in these areas are more likely to be familiar with it. **
How can one fix the error Fivem SPL?
To fix the error Fivem SPL, you can try the following steps: 1. Update your Fivem client to the latest version, as the error may be caused by an outdated client. 2. Verify the integrity of your game files through the Fivem client to ensure that all necessary files are present and not corrupted. 3. Check for any conflicting mods or plugins that may be causing the error and try disabling them to see if the issue resolves. 4. If the error persists, you can reach out to the Fivem support team for further assistance and troubleshooting. **
Similar search terms for SPL-Lab-Next-USB
Top-Angebote
Products related to SPL-Lab-Next-USB:
-
SPL Lab Next-Lab RTAThe Next-Lab RTA is a Measurement Microphone from SPL Lab with Lab-Bus digital bus and anodized aluminum housing. The frequency range is from 10 to 20000 Hz. The amplitude range covers 50 to 120 dB, with the High SPL Edition ranging from 60 to 155 dB. The internal accuracy is ADC 16 Bit. Calibration is done according to Audiomatica CLIO, and for the High SPL Edition, it is calibrated according to TERM-LAB. Highly sensitive, omnidirectional electret microphone inserts, low-frequency amplifiers, ADC units, and a Lab-Bus interface are integrated; special notches surround the microphone insert, allowing for tripod mounting. Features Measurement Microphone Lab-Bus digital bus Anodized aluminum housing Highly sensitive, omnidirectional electret microphone inserts Low-frequency amplifier integrated ADC units integrated Lab-Bus interface Lab-Bus port for data transmission Special notches around the microphone insert Tripod mounting possible Calibrated according to Audiomatica CLIO Calibrated according to TERM-LAB (High SPL Edition) Included: microphone for measuring AFC, Lab-Bus connection cable Technical Specifications Frequency range 10 to 20000 Hz Amplitude range 50 to 120 dB Amplitude range 60 to 155 dB (High SPL Edition) Internal accuracy ADC 16 Bit260,72 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next LCDThe next LCD product is an autonomous SPL Meter from SPL Lab with a graphical display and backlighting. Two lab bus connections are provided for connecting sensors, complemented by an integrated signal generator for sine and noise. The internal battery, a USB port for charging and PC connection, as well as two RCA outputs of the audio signal generator are integrated. The software is updatable and allows data transfer to the PC, with optional Wi-Fi support. The device is designed as a monoblock, has 8 control buttons, and a three-color LED to indicate status and battery charge. The housing is made of shock-resistant plastic; display of spectrum and waveform as well as operation with two signal sources are provided. Features SPL Meter Completely autonomous Internal battery Graphical display with backlighting Two lab bus connections for connecting sensors Audio signal generator: sine, noise Updatable software Data transfer to the PC Optional Wi-Fi support USB port for charging and PC connection Two RCA outputs of the audio signal generator 8 control buttons Three-color LED for status and charge indication Monoblock design Housing made of shock-resistant plastic Technical Specifications Software modes: SPL mode for measuring sound pressure peak values with spectrum and waveform display, distortion clip detector, simultaneous operation with two signal sources AVG mode for measuring the temporal average value of a sound pressure, simultaneous operation with two signal sources RTA mode for measuring AFC with spectrum and waveform display, spectrum division into octaves, distortion clip detector PWR mode for measuring alternating and direct current, voltage, power, signal frequency, and nonlinear distortion clip, simultaneous operation with two signal sources GEN mode: background stereo generator for test signals sine, pink noise, white noise CON mode: connection to the PC, adjustment and transfer of digitized data for analysis in Measuring Center for Windows Functions: measuring sound pressure with Next-Lab SPL sensor Measuring AFC and spectral analysis of the signal with Next-Lab RTA microphone Measurement of the power characteristics of direct and alternating current circuits with Next-Lab Power Sensor Simultaneous operation with two signal sources Audio signal generator operates in the background alongside measurement Display of signal form and spectrum on the screen Digital display of measurement values on the screen Control and data transfer via USB port or wireless network to a PC Preparation and execution of car audio competitions AMT, EMMA, dB Drag, IASCA, BassRace as well as via the internet optionally Measurement of the characteristics of acoustic systems for home, in cars, or in concert halls and their setup Ergonomics: USB port for connection to a PC and for charging Two lab bus connections for sensors Two RCA outputs of the audio signal generator Delivery switch Three-color LED to indicate status and battery charge Monoblock design, housing...401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next-Lab Power SensorThe Next-Lab Power Sensor is an SPL Meter from SPL Lab with a digital lab bus and internal dual-channel ADC. It allows measurements of direct current circuits (only Hall sensor version) as well as alternating current circuits with a frequency of up to 15000 Hz. The non-contact current sensor covers 1 to 1200 A (Hall sensor version) or up to 400 A in the current clamp version. The voltage measurement ranges from 1 to 300 volts. The power measurement is up to 360 kW (Hall sensor version) or up to 120 kW (current clamp version). True-RMS algorithm, impedance measurement, and distortion detector (clip) are integrated. Features SPL Meter Digital lab bus Internal dual-channel ADC Non-contact current sensor 1 to 1200 A (Hall sensor version) Non-contact current sensor up to 400 A (current clamp version) Measurement of direct current circuits (only Hall sensor version) Measurement of alternating current circuits up to 15000 Hz Voltage measurement 1 to 300 V Power measurement up to 360 kW (Hall sensor version) Power measurement up to 120 kW (current clamp version) True-RMS algorithm Impedance measurement Distortion detector (clip) Technical Specifications Assessment of the quality index of electrical home and industrial networks Measurement of direct current, voltage, and power (only Hall sensors) Measurement of alternating current, voltage, and power according to True-RMS Measurement of the impedance of acoustic systems Determination of the harmonic distortion coefficient Measurement of the AFC of the audio path Receiving and analyzing the signal waveform Adjusting the levels (gain) of various amplifier channels to each other Tuning the car radio and amplifiers by monitoring the harmonic distortion, AFC, and waveform of the reproduced signal Setting and adjusting the cutoff frequencies for crossovers and internal filters Fine-tuning the components of the audio system Setting the distortion factor coefficient Package contents: power sensor Package contents: lab bus connection cable348,81 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next-LCD SEThe Next-LCD SE from SPL Lab is a versatile SPL Meter designed for precise sound pressure measurements. Equipped with a high-resolution color display, it offers real-time readings and allows for cascading use with multiple sensors and microphones via Lab Bus ports. Thanks to integrated features such as distortion and clip detection, as well as flexible power supply via USB-C or batteries, it is ideal for both car audio competitions and use in home and professional sound systems. With various software modes like SPL, AVG, and RTA, you can perform comprehensive measurements and analyze the results directly on the display. Its compact and robust design ensures easy handling and smooth operation in various environments. Highlights Autonomous Measuring Device with high-resolution color display for real-time display Cascadable via two Lab Bus ports for sensors and microphones Simultaneous operation with two different signal sources possible Integrated distortion and clip detector for clean tuning Flexible power supply via USB-C or batteries Features Sound pressure measurement with Next-Lab SPL Sensor Frequency response measurement and spectral analysis with Next-Lab RTA Microphone Volt-ampere measurement in AC/DC circuits with Next-Lab Power Sensor Simultaneous operation with two signal sources Display of waveform and spectrum directly on the display Numerical measurement display in real-time Device control and data transfer to PC via USB-C Fine-tuning of car audio, home, and professional sound systems Measurement and adjustment of vehicle and industrial power grids Suitable for car audio competitions like AMT, EMMA, dB Drag, and IASCA Software Modes SPL Mode: Peak sound pressure measurement with spectrum and waveform AVG Mode: Capture of time-averaged sound pressure values RTA Mode: Frequency response measurement with spectral representation in octave bands PWR Mode: Measurement of current, voltage, power, frequency, and clip SQL Mode: Volume measurement for front and rear systems Hybrid Modes: SPL+PWR and AVG+PWR to determine acoustic efficiency PC Mode: Data transfer to the SPL Lab Measuring Center Software Ergonomics & Connections Compact monoblock housing made of impact-resistant plastic High-resolution color display with backlighting Four control buttons and tri-color LED for status indication Two digital Lab Bus ports for external sensors USB-C port for power supply and data transfer Operation via USB-C or four AA batteries Scope of Delivery Main device Next-LCD SE USB cable for power supply or PC connection SPL Lab Measuring Center Software for Windows Audio CD with setup tracks401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
Is it possible to wash your hair the next morning in the sleep lab?
In most sleep labs, it is not recommended to wash your hair the next morning. This is because the electrodes attached to your scalp need to stay in place for accurate monitoring of brain activity during sleep. Washing your hair could potentially disrupt the electrodes and affect the quality of the data collected. It is best to wait until after the sleep study is completed before washing your hair. **
-
What is the difference between SPL dB and dBA?
SPL dB (Sound Pressure Level in decibels) measures the total sound pressure level regardless of the frequency of the sound. It is a linear measurement of sound intensity. On the other hand, dBA is a weighted measurement of sound pressure level that takes into account the sensitivity of the human ear to different frequencies. It is a logarithmic measurement that reflects the perceived loudness of the sound by the human ear. In summary, SPL dB measures the total sound pressure level, while dBA measures the sound pressure level adjusted for human perception. **
-
What is a USB 3.0 Docking Station?
A USB 3.0 Docking Station is a device that allows you to connect multiple peripherals, such as monitors, keyboards, mice, and external storage devices, to your laptop or computer using a single USB 3.0 port. It provides additional ports and functionality that may not be available on your device, making it easier to expand your setup and increase productivity. This type of docking station is known for its high-speed data transfer capabilities and compatibility with a wide range of devices. **
-
Is the HP USB-C G5 Docking Station compatible with USB 3.0?
Yes, the HP USB-C G5 Docking Station is compatible with USB 3.0. It has multiple USB ports, including USB 3.0 ports, which allow for high-speed data transfer and connectivity with USB 3.0 compatible devices. This makes it a versatile docking station for users who need to connect various peripherals and devices to their laptop or computer. **
Is the USB-C docking station fully functional with a USB-A adapter?
No, the USB-C docking station may not be fully functional with a USB-A adapter. While a USB-A adapter may allow you to physically connect the docking station to a USB-A port, it may not provide the necessary power and data transfer capabilities that the docking station requires. Additionally, certain features of the docking station, such as video output or high-speed data transfer, may not work properly when using a USB-A adapter. It is recommended to use the docking station with a USB-C port for full functionality. **
Why is the USB docking station not working?
The USB docking station may not be working due to a variety of reasons such as a faulty USB cable, incompatible devices, outdated drivers, or a malfunctioning docking station itself. It is important to check all connections, ensure that the devices are compatible with the docking station, update drivers, and try using a different USB cable to troubleshoot the issue. If the problem persists, it may be necessary to contact the manufacturer for further assistance or consider replacing the docking station. **
Top-Angebote
Products related to SPL-Lab-Next-USB:
-
SPL Lab Next USBThe next USB product is an SPL Meter from SPL Lab with four independent Lab Bus connections for pressure sensors, microphones, or power sensors. It does not have a built-in display and is not intended for standalone operation. Control and data transfer occur via USB to a PC or optionally wirelessly through a built-in Wi-Fi module to a tablet PC or smartphone. Simultaneous operation with four signal sources is possible. The monoblock design includes a control button, a USB port for connecting to the PC and charging, four Lab Bus connections, a power switch, and a three-color LED to indicate status and battery charge. The housing is made of shock-resistant plastic. The system is cascadeable. Measurements are supported with Next-Lab SPL Sensor, Next-Lab RTA Microphone, and Next-Lab Power Sensor. Features SPL Meter Four independent Lab Bus connections for pressure sensors, microphones, or power sensors Simultaneous operation with four signal sources Control and data transfer via USB with PC Optional wireless connection via built-in Wi-Fi module with tablet PC or smartphone Compatible with Next-Lab SPL Sensor, Next-Lab RTA Microphone, Next-Lab Power Sensor Cascadeable No built-in display, not for standalone operation Technical Specifications Design: Monoblock Housing material: shock-resistant plastic Interfaces: USB, Wi-Fi optional Controls: control button, power switch Display: three-color LED for status and battery level USB port for PC connection and charging401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next-Lab SPL SensorThe SPL Lab Next-Lab SPL Sensor is an SPL Meter designed for operation with Next-LCD and Next-USB. The signal is digitized internally via a 16-bit ADC and transmitted digitally over the Lab Bus. Cable signal transmission is possible up to 10 m. An extended amplitude range and a noise reduction system allow for measurement accuracy of up to 0.1 dB. Calibrated according to TERM-LAB, each unit is tested and calibrated. Monoblock design with high-frequency semiconductor sensor, integrated ADC module, and Lab Bus interface including Lab Bus port. Vacuum suction cups on the back for attachment to smooth surfaces like glass, housing made of impact-resistant plastic. Frequency range 10–120 Hz with an amplitude range of 110–185 dB; Wide Band Edition with 10–20000 Hz and 100–182 dB. Supports measurement of sound pressure level (SPL), spectral analysis (AFC), signal waveform, and measurement of harmonic distortions of low-frequency signals as well as measurement of noise levels and characteristics of acoustic systems. Features SPL Meter Lab Bus digital bus Internal 16-bit ADC Signal digitization directly in the sensor Digital data transmission via Lab Bus Cable length for data transmission up to 10 m Extended amplitude range Noise reduction system Measurement accuracy up to 0.1 dB Calibrated according to TERM-LAB Monoblock design High-frequency semiconductor sensor Integrated ADC module Lab Bus interface with Lab Bus port Housing made of impact-resistant plastic Vacuum suction cups for attachment to smooth surfaces like glass Compatible with Next-LCD and Next-USB Measurement of sound pressure level (SPL) Spectral analysis (AFC) Receive and analyze signal waveform Measurement of harmonic distortions of low-frequency signals Measurement of noise levels Measurement of characteristics of acoustic systems Technical Specifications Frequency range standard: 10–120 Hz Amplitude range standard: 110–185 dB Frequency range Wide Band Edition: 10–20000 Hz Amplitude range Wide Band Edition: 100–182 dB Internal precision ADC: 16 bit Measurement accuracy: up to 0.1 dB Calibration: TERM-LAB Data transmission: digital via Lab Bus Maximum cable length for transmission: 10 m300,99 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next-Lab RTAThe Next-Lab RTA is a Measurement Microphone from SPL Lab with Lab-Bus digital bus and anodized aluminum housing. The frequency range is from 10 to 20000 Hz. The amplitude range covers 50 to 120 dB, with the High SPL Edition ranging from 60 to 155 dB. The internal accuracy is ADC 16 Bit. Calibration is done according to Audiomatica CLIO, and for the High SPL Edition, it is calibrated according to TERM-LAB. Highly sensitive, omnidirectional electret microphone inserts, low-frequency amplifiers, ADC units, and a Lab-Bus interface are integrated; special notches surround the microphone insert, allowing for tripod mounting. Features Measurement Microphone Lab-Bus digital bus Anodized aluminum housing Highly sensitive, omnidirectional electret microphone inserts Low-frequency amplifier integrated ADC units integrated Lab-Bus interface Lab-Bus port for data transmission Special notches around the microphone insert Tripod mounting possible Calibrated according to Audiomatica CLIO Calibrated according to TERM-LAB (High SPL Edition) Included: microphone for measuring AFC, Lab-Bus connection cable Technical Specifications Frequency range 10 to 20000 Hz Amplitude range 50 to 120 dB Amplitude range 60 to 155 dB (High SPL Edition) Internal accuracy ADC 16 Bit260,72 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next LCDThe next LCD product is an autonomous SPL Meter from SPL Lab with a graphical display and backlighting. Two lab bus connections are provided for connecting sensors, complemented by an integrated signal generator for sine and noise. The internal battery, a USB port for charging and PC connection, as well as two RCA outputs of the audio signal generator are integrated. The software is updatable and allows data transfer to the PC, with optional Wi-Fi support. The device is designed as a monoblock, has 8 control buttons, and a three-color LED to indicate status and battery charge. The housing is made of shock-resistant plastic; display of spectrum and waveform as well as operation with two signal sources are provided. Features SPL Meter Completely autonomous Internal battery Graphical display with backlighting Two lab bus connections for connecting sensors Audio signal generator: sine, noise Updatable software Data transfer to the PC Optional Wi-Fi support USB port for charging and PC connection Two RCA outputs of the audio signal generator 8 control buttons Three-color LED for status and charge indication Monoblock design Housing made of shock-resistant plastic Technical Specifications Software modes: SPL mode for measuring sound pressure peak values with spectrum and waveform display, distortion clip detector, simultaneous operation with two signal sources AVG mode for measuring the temporal average value of a sound pressure, simultaneous operation with two signal sources RTA mode for measuring AFC with spectrum and waveform display, spectrum division into octaves, distortion clip detector PWR mode for measuring alternating and direct current, voltage, power, signal frequency, and nonlinear distortion clip, simultaneous operation with two signal sources GEN mode: background stereo generator for test signals sine, pink noise, white noise CON mode: connection to the PC, adjustment and transfer of digitized data for analysis in Measuring Center for Windows Functions: measuring sound pressure with Next-Lab SPL sensor Measuring AFC and spectral analysis of the signal with Next-Lab RTA microphone Measurement of the power characteristics of direct and alternating current circuits with Next-Lab Power Sensor Simultaneous operation with two signal sources Audio signal generator operates in the background alongside measurement Display of signal form and spectrum on the screen Digital display of measurement values on the screen Control and data transfer via USB port or wireless network to a PC Preparation and execution of car audio competitions AMT, EMMA, dB Drag, IASCA, BassRace as well as via the internet optionally Measurement of the characteristics of acoustic systems for home, in cars, or in concert halls and their setup Ergonomics: USB port for connection to a PC and for charging Two lab bus connections for sensors Two RCA outputs of the audio signal generator Delivery switch Three-color LED to indicate status and battery charge Monoblock design, housing...401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
Who is familiar with the SPL programming language?
Software developers and engineers who work with audio processing and analysis are typically familiar with the SPL programming language. Additionally, individuals who specialize in digital signal processing and audio programming may also have experience with SPL. Overall, SPL is a niche language used in specific technical fields, so those who work in these areas are more likely to be familiar with it. **
-
How can one fix the error Fivem SPL?
To fix the error Fivem SPL, you can try the following steps: 1. Update your Fivem client to the latest version, as the error may be caused by an outdated client. 2. Verify the integrity of your game files through the Fivem client to ensure that all necessary files are present and not corrupted. 3. Check for any conflicting mods or plugins that may be causing the error and try disabling them to see if the issue resolves. 4. If the error persists, you can reach out to the Fivem support team for further assistance and troubleshooting. **
-
Is it possible to wash your hair the next morning in the sleep lab?
In most sleep labs, it is not recommended to wash your hair the next morning. This is because the electrodes attached to your scalp need to stay in place for accurate monitoring of brain activity during sleep. Washing your hair could potentially disrupt the electrodes and affect the quality of the data collected. It is best to wait until after the sleep study is completed before washing your hair. **
-
What is the difference between SPL dB and dBA?
SPL dB (Sound Pressure Level in decibels) measures the total sound pressure level regardless of the frequency of the sound. It is a linear measurement of sound intensity. On the other hand, dBA is a weighted measurement of sound pressure level that takes into account the sensitivity of the human ear to different frequencies. It is a logarithmic measurement that reflects the perceived loudness of the sound by the human ear. In summary, SPL dB measures the total sound pressure level, while dBA measures the sound pressure level adjusted for human perception. **
Similar search terms for SPL-Lab-Next-USB
-
SPL Lab Next-Lab Power SensorThe Next-Lab Power Sensor is an SPL Meter from SPL Lab with a digital lab bus and internal dual-channel ADC. It allows measurements of direct current circuits (only Hall sensor version) as well as alternating current circuits with a frequency of up to 15000 Hz. The non-contact current sensor covers 1 to 1200 A (Hall sensor version) or up to 400 A in the current clamp version. The voltage measurement ranges from 1 to 300 volts. The power measurement is up to 360 kW (Hall sensor version) or up to 120 kW (current clamp version). True-RMS algorithm, impedance measurement, and distortion detector (clip) are integrated. Features SPL Meter Digital lab bus Internal dual-channel ADC Non-contact current sensor 1 to 1200 A (Hall sensor version) Non-contact current sensor up to 400 A (current clamp version) Measurement of direct current circuits (only Hall sensor version) Measurement of alternating current circuits up to 15000 Hz Voltage measurement 1 to 300 V Power measurement up to 360 kW (Hall sensor version) Power measurement up to 120 kW (current clamp version) True-RMS algorithm Impedance measurement Distortion detector (clip) Technical Specifications Assessment of the quality index of electrical home and industrial networks Measurement of direct current, voltage, and power (only Hall sensors) Measurement of alternating current, voltage, and power according to True-RMS Measurement of the impedance of acoustic systems Determination of the harmonic distortion coefficient Measurement of the AFC of the audio path Receiving and analyzing the signal waveform Adjusting the levels (gain) of various amplifier channels to each other Tuning the car radio and amplifiers by monitoring the harmonic distortion, AFC, and waveform of the reproduced signal Setting and adjusting the cutoff frequencies for crossovers and internal filters Fine-tuning the components of the audio system Setting the distortion factor coefficient Package contents: power sensor Package contents: lab bus connection cable348,81 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab Next-LCD SEThe Next-LCD SE from SPL Lab is a versatile SPL Meter designed for precise sound pressure measurements. Equipped with a high-resolution color display, it offers real-time readings and allows for cascading use with multiple sensors and microphones via Lab Bus ports. Thanks to integrated features such as distortion and clip detection, as well as flexible power supply via USB-C or batteries, it is ideal for both car audio competitions and use in home and professional sound systems. With various software modes like SPL, AVG, and RTA, you can perform comprehensive measurements and analyze the results directly on the display. Its compact and robust design ensures easy handling and smooth operation in various environments. Highlights Autonomous Measuring Device with high-resolution color display for real-time display Cascadable via two Lab Bus ports for sensors and microphones Simultaneous operation with two different signal sources possible Integrated distortion and clip detector for clean tuning Flexible power supply via USB-C or batteries Features Sound pressure measurement with Next-Lab SPL Sensor Frequency response measurement and spectral analysis with Next-Lab RTA Microphone Volt-ampere measurement in AC/DC circuits with Next-Lab Power Sensor Simultaneous operation with two signal sources Display of waveform and spectrum directly on the display Numerical measurement display in real-time Device control and data transfer to PC via USB-C Fine-tuning of car audio, home, and professional sound systems Measurement and adjustment of vehicle and industrial power grids Suitable for car audio competitions like AMT, EMMA, dB Drag, and IASCA Software Modes SPL Mode: Peak sound pressure measurement with spectrum and waveform AVG Mode: Capture of time-averaged sound pressure values RTA Mode: Frequency response measurement with spectral representation in octave bands PWR Mode: Measurement of current, voltage, power, frequency, and clip SQL Mode: Volume measurement for front and rear systems Hybrid Modes: SPL+PWR and AVG+PWR to determine acoustic efficiency PC Mode: Data transfer to the SPL Lab Measuring Center Software Ergonomics & Connections Compact monoblock housing made of impact-resistant plastic High-resolution color display with backlighting Four control buttons and tri-color LED for status indication Two digital Lab Bus ports for external sensors USB-C port for power supply and data transfer Operation via USB-C or four AA batteries Scope of Delivery Main device Next-LCD SE USB cable for power supply or PC connection SPL Lab Measuring Center Software for Windows Audio CD with setup tracks401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab USB Bass Meter SEUSB Bass Meter SE is an SPL Meter from SPL Lab for sound pressure measurements in the low-frequency range. It measures the sound pressure level from 120 to 183 dB in the frequency range of 10 to 120 Hz. The deviation from the official Termlab meter is a maximum of 0.1 dB and it is calibrated according to TERM-LAB. Data transmission is wired via USB. It can be used with smartphones, tablets, and PCs and supports Windows, Android, and iOS. The connection of Android smartphones is done via a USB adapter. An optional app displays the dB value along with a video recording. Free software for Windows is available. Features SPL Meter Sound pressure level measurement in the low-frequency range Wired data transmission via USB Supports Windows, Android, and iOS Usable with smartphones, tablets, and PCs Android smartphone connection via USB adapter Optional app with dB display along with video recording Calibrated according to TERM-LAB Deviation from the official Termlab meter: maximum 0.1 dB Free software for Windows Applicable at unlimited sound pressure (AMT, EMMA, dB Drag, IASCA, BassRace) Included: USB Bass Meter SE, SPL Lab Measuring Center Software for Windows, audio CD with audio tracks (sine, sweep tones, noise), USB cable for charging Technical Specifications Frequency range: 10–120 Hz Amplitude range: 120–183 dB Deviation to Termlab: ≤ 0.1 dB362,44 €*Shipping: 0,00 €Secure redirect to the provider
-
SPL Lab USB RTA Meter (Pro Edition)The SPL Lab USB RTA Meter (Pro Edition) is a Measurement Microphone made of anodized aluminum with a highly sensitive, omnidirectional electret microphone capsule, integrated low-frequency amplifier, and precision ADC with 16 bits. It operates in the frequency range of 10 to 20,000 Hz and covers an amplitude range of 50 to 120 dB. Data transmission is done via a mini-USB connection. Special notches around the microphone capsule support a smooth directional characteristic, and the acoustically correct design focuses on an input signal close to the original. Calibrated according to Audiomatica CLIO. Free SPL Lab measurement center software for Windows and Android. Tripod mounting possible. Features Measurement Microphone Anodized aluminum housing Highly sensitive, omnidirectional electret microphone capsule Integrated low-frequency amplifier Special notches for smooth directional characteristic Acoustically correct design Tripod mounting possible Free software Technical Specifications Frequency range: 10 Hz to 20,000 Hz Amplitude range: 50 dB to 120 dB Calibration: Audiomatica CLIO Integrated precision ADC: 16 bits Connection: Mini-USB Included: USB microphone Included: USB cable for connection to PC Included: SPL Lab measurement center software for Windows and Android Included: Audio CD with audio tracks for tuning (sine, sweep tones, noise)401,65 €*Shipping: 0,00 €Secure redirect to the provider
-
What is a USB 3.0 Docking Station?
A USB 3.0 Docking Station is a device that allows you to connect multiple peripherals, such as monitors, keyboards, mice, and external storage devices, to your laptop or computer using a single USB 3.0 port. It provides additional ports and functionality that may not be available on your device, making it easier to expand your setup and increase productivity. This type of docking station is known for its high-speed data transfer capabilities and compatibility with a wide range of devices. **
-
Is the HP USB-C G5 Docking Station compatible with USB 3.0?
Yes, the HP USB-C G5 Docking Station is compatible with USB 3.0. It has multiple USB ports, including USB 3.0 ports, which allow for high-speed data transfer and connectivity with USB 3.0 compatible devices. This makes it a versatile docking station for users who need to connect various peripherals and devices to their laptop or computer. **
-
Is the USB-C docking station fully functional with a USB-A adapter?
No, the USB-C docking station may not be fully functional with a USB-A adapter. While a USB-A adapter may allow you to physically connect the docking station to a USB-A port, it may not provide the necessary power and data transfer capabilities that the docking station requires. Additionally, certain features of the docking station, such as video output or high-speed data transfer, may not work properly when using a USB-A adapter. It is recommended to use the docking station with a USB-C port for full functionality. **
-
Why is the USB docking station not working?
The USB docking station may not be working due to a variety of reasons such as a faulty USB cable, incompatible devices, outdated drivers, or a malfunctioning docking station itself. It is important to check all connections, ensure that the devices are compatible with the docking station, update drivers, and try using a different USB cable to troubleshoot the issue. If the problem persists, it may be necessary to contact the manufacturer for further assistance or consider replacing the docking station. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.